Popular Pipes Group of Companies (PPG) manufactures UPVC High Pressure Pipes, UPVC Pipes & Fittings for Soil, Waste & Vent purpose, PPRC Hot & Cold Water Distribution System, High Dentistry Polyethylene Pipe & Fittings (HDPE), UPVC Electrical conduit & accessories, Garden Pipe, Gas Pipe, PVC Tape and Cable Trunk to strict industry standards with a reputation for quality product, innovation and technical leadership.
Popular Pipes Group of Companies is the manufacturing group of companies having expertise of more than four decades. Haji Sheikh M. Rafique started it as a cottage industry named Popular PVC Pipe Factory in 1975. With constant dedication and firm determination of professionally committed and skilled team working with proper planning & future forecasting it became Popular Pipes Group of Companies.
We are the Pioneers and leading manufacturers of UPVC pipes & fittings having more than 4 decades of experience in the industry. In line with the policy of continuous demand driven expansion, improvement in quality, diversification of products, and efficiency of operations; the organization has a nationwide distribution network with a strong presence all over Pakistan. We have complete In-house lab facilities as per international standards where competent polymer engineers are working hard for the continuous quality improvement. With the best R&D facilities and professional workforce we are engaged to provide the best for our valued customers.
Our organization solely represented Pakistan’s PVC Pipe Industry in Qatar Exhibition. We were also the sole participants having the privilege of getting our name published in “PVC 2017 world conference brighton-UK”.
UPVC DRAINAGE SYSTEM
(Standard BS EN-1329)
Un-Plasticized polyvinyl chloride (U-PVC) drainage Pipes & Fittings discharge inside the building structure. Un-Plasticized polyvinyl chloride (U-PVC) Fittings is used for non-pressure underground drainage and sewerage.
Popular Pipes produces a range of UPVC pipes for above and below ground use made from virgin raw material. It has full range of fittings in solvent joint for all sizes. The pipes are produced as per standard BS EN 1329. Sizes Range from 56mm to 160mm. Popular Pipes can provide a range of fittings from its own brand.
SIZE RANGE: Pipes & Fittings
56mm, 63mm, 82mm, 90mm, 110mm & 160mm
COLOR: White
(Standard DIN-8062)
Popular Pipes produces a range of UPVC pipes made from virgin raw material as per DIN-8062 standard.
SIZE RANGE: Pipes & Fittings
63mm, 90mm, 110mm & 160mm
COLOR: White
UPVC SEWERAGE SERIES
S-60 | S-80 | S-100
Un-Plasticized polyvinyl chloride (U-PVC) Sewerage Series Pipes & Fittings discharge within the building structure. (Low and High Temperature) Un-Plasticized polyvinyl chloride (U-PVC) Fittings are used for non-pressure underground drainage and sewerage.
SIZE RANGE: Pipes
2″, 3″, 4″, 5″, 6″ & 8″
SIZE RANGE: Fittings
2″, 3″ & 4″
COLOR: White
UPVC PIPES: SDR SERIES
ASTM D-2241
SIZE RANGE:
3/4″ to 8″ with complete Fitting range (ASTM D-2241)
UPVC PRESSURE PIPES & FITTINGS – WATER SUPPLY SYSTEM
JOINTING: A wide range of UPVC Pipes & Fittings are available. They are economical, durable, leak proof, easy & quick for the connections. These Fittings include Coupling Sockets, Elbows, Tees, end Caps Flanges, (45 & 90) and reducers. UPVC Pipes & Fittings are available in various sizes for different pressure classes of Pipes. Confirming to BS, PS, ASTM & other international Standards.
POPULAR UPVC PRESSURE JOINTING SYSTEM
The following jointing systems are available,
1.Solvent Cement Joint
2.Z Joint/Rubber Ring Joint
SOLVENT CEMENT JOINTING SYSTEM
PROCEDURE FOR SOLVENT JOINT INSTALLATION:
Chamfer the Pipe and at an angle of 15 or 20 to an extent for 0.5mm length
Apply solvent cement thoroughly & evenly over spigot end and inside of socket
Ensure that both spigot & socket are thoroughly clean
Inset the pipe quickly into the socket
Hold for a while say 4-5 minutes
Wipe all excessive solvent cement with a cloth Leave for 24 hours before pressure testing
THINGS TO REMEMBER
Knife or half round coarse file, natural bristle, primer, application cane solvent cement & tools tray are required for solvent cement jointing.
Z” JOINTING SYSTEM
PROCEDURE FOR INSTALLATION:
Ensure that the mating areas of spigot and socket are thoroughly clean. This is extremely important for the correct positioning of the rubber ring during assembly.
Set the rubber ring into the grove, pushing it firmly in as far as it goes all the way round. The opening in the rubber ring must face backwards.
Assess the full socket depth by simply measurement & mark spigot accordingly. Accurate axial alignment of the spigot & socket prior to jointing is important, hand feed spigot into rubber joint until resistance from the inner seating section is felt.
Stop at the entry mark (13-25mm) from the end of the socket to cater for potential expansion & contraction.
Make sure that the pipes to be jointed are aligned correctly against each other.
U-PVC PS-1905 EQUIVALENT TO BS-6099 TERIAL.
Un-Plasticized Polyvinyl Chloride (U-PVC).
PVC Electrical Conduits Pipe & Fittings are in Grey Color.
APPLICATIONS
Open/surface and concealed wiring in house, residential, commercial buildings and industrial plants.
Telecommunications and Cable casing application.
Traffic signal connections, street light & wiring at public places.
Size Range: 1/2” to 8” with complete accessories
PPR-100 PIPES AND FITTINGS
HOT & COLD WATER DISTRIBUTION SYSTEM DIN 8077/8078 DIN 16962, EN ISO 15874
Poly propylene is the fastest growing polymer in pipe industry; its best quality is PPR-100 at present. PPR-100 simply means that the strength of the material is to withstand the pressure of 100 bar. That is the reason we use PPR-100 for the 1st time in Pakistan to manufacture PPR-100 pipes in three different classes PN 16, PN 20, PN 25. PPG introduced PPR-100 fittings as per DIN 16962 and EN ISO 15874, these fittings are manufactured as per PN 25. Its metal portions are made of brass and are electroplated with food graded nickel.
SALIENT FEATURES OF PPR-100 PIPES AND FITTINGS
Exceptional corrosion & erosion resistance as PPR-100 is a polymer product, hence after installing PPR-100 just forget about corrosion problems & so it is an ideal product for various Chemical & other Fluid transmit application
High chemical resistance power even at high temperatures
Low Thermal Conductivity makes it an ideal Piping system where one needs to Control & Maintain the Temperature. Indeed it has the lowest Thermal Conductivity compared to any other polymers
Anti-Fungal & Non-toxic product, free from the growth of any bacteria
Leak-proof & airtight homogeneous joints by fusion welding method
Long Service life, above 50 years over a wide temperature range
Negligible head loss, Minimum Pressure loss & Higher Flow Rate due to smooth internal surface & homogeneous joints
Inherited characteristic of high impact strength makes its suitable for industrial application at unskilled labor region
Wide Temperature range: -40C to +90C (suitable for both hot & cold applications)
Very low thermal loss, as PPR-C is poor conductor of heat & condensation
Trouble-free installation process & light in weight for transmit
Superior Impact, Fracture Resistance & Minimum Crack Transmission due to Co-polymer with random assortment.
POPULAR WATER TANK
POPULAR PVC BOARD
CABLE WIRING SYSTEM
POPULAR SOLVENT CEMENT
.gif "AMS Security Vision")
.gif "Electronic Security Co")
